15 W magnetic wireless charging mount — air vent
A mount that holds the phone with magnets and charges it at the same time, up to 15 W. You put the phone on one-handed, it sticks and starts charging. Fixes to the air vent.
In stock — order processed within 24 hours
- Orderedaujourd'hui
- Dispatchedwithin 24 working hours
- Deliveredat the latest
Free delivery in mainland France. The dates are calculated on working days from today.
- Free shipping, with no minimum order
- Order processed within 24 hours — delivered within 7 working days
- 14 days to change your mind, no reason required
- Secure payment — we never see your card number
You bring the phone close, it sticks by itself and starts charging.
Key points
- Magnetic mount: one movement with one hand instead of three with a clamp.
- Induction charging up to 15 W depending on the phone.
- Fixes to a horizontal air vent slat, locked with a screw.
- Holds directly on a MagSafe iPhone; metal ring supplied for the rest.
- The battery level climbs during the journey instead of falling.
What to know before ordering
- Charge
- Induction up to 15 W depending on the phone.
- Attachment
- Clamps onto a horizontal air vent slat, locked with a screw.
- Compatibility
- MagSafe iPhone directly; other phones with a compatible case or the metal ring supplied.
- Cable
- USB-C fourni. Adaptateur allume-cigare non inclus.
- Not suitable for
- Round vents or very fine vertical slats.
What is in the box
- The mount and its screw fixing.
- The USB-C cable and the adhesive metal ring.
How to use it safely
- Place the metal ring as a ring, as shown: stuck flat across the charging area, it interferes with induction.
- Do not put the mount in front of a vent you use in the depths of winter or summer: heat and cold blown onto the phone do it no good.
- Position it at eye level without blocking the road.
Check before you buy
- Look at your vents: the mount grips a horizontal slat. Round vents and those with fine vertical slats will not do.
- Plan on a cigarette lighter charger with enough power: without it, charging will be slow whatever the quality of the mount.
- If you do not have a MagSafe iPhone, plan on a compatible case or the ring supplied.
Shipping & returns
Preparation : order processed within 24 hours, tracking number sent as soon as it ships.
Shipping : mainland France, within 7 working days. That is a maximum, not an average.
Shipping cost : free, with no minimum order.
Returns : 14 days from delivery, with no reason required.
Description
Rest it, don't clip it
A spring clamp needs two hands: one to open it, one to place the phone. With a magnetic mount, you bring the phone close and it sets itself in place, square. That is one movement instead of three, and it is the only thing that counts when you are setting off.
It charges at the same time
The induction coil delivers up to 15 W depending on the phone. Navigation and a lit screen use more than a slow USB socket gives back: here the battery level climbs during the journey instead of falling.
Magnets or case
On a MagSafe iPhone, it holds directly. On any other phone, you need a compatible case or the metal ring supplied, stuck to the back or slipped inside the case. Careful: a metal ring placed over on the charging area can interfere with induction — position it as shown, in a ring.
On the vent
The mount grips a horizontal slat and locks with a screw. That is steadier than a suction cup on a windscreen, which lets go in strong heat, and the phone stays at eye level without blocking the road.
Worth knowing
- Charges up to 15 W ; plan on a cigarette lighter charger with enough power, otherwise charging will be slow.
- USB-C cable supplied, adaptateur allume-cigare non inclus.
- Not suitable for round vents or very fine vertical slats.
- Free shipping within mainland France, with no minimum order.
- 14 days to change your mind, returns accepted with no reason required.
When it earns its place
The daily commute with navigation
A lit screen and running navigation use more than a slow USB socket gives back. Here the battery climbs during the journey.
The business of starting up
One hand on the wheel, the other bringing the phone close: it sets itself in place, square, with no clamp to prise open.
The windscreen mount that lets go in summer
A suction cup lets go in strong heat. A screw clamp on the vent holds all year.
The shared vehicle
It comes off and goes back on in seconds from one car to another, leaving no mark and no glue.
Questions we are asked about this product
Does it work without a MagSafe iPhone?
Yes, with a compatible magnetic case, or with the metal ring supplied: you stick it to the back of the phone or slip it inside the case.
Does the charging work through my case?
Induction passes through plastic, silicone and thin leather. It passes through neither a metal plate nor a magnetic card holder. And if you stick on the ring supplied, place it as a ring: laid across the charging area, it interferes with induction.
Do you need a particular charger?
The mount calls for a cigarette lighter charger with enough power to reach 15 W. On a slow USB socket, charging will work but stay slow. The USB-C cable is supplied, the adapter is not.
Does it fit every air vent?
No. It grips a horizontal slat and locks with a screw. Round vents and those with very fine vertical slats will not do.
Does the phone stay put on a rough road?
The magnets hold a phone, case included, in normal use. On a very rough track, as with any magnetic mount, it is better to put it in a cubby.
Why order from Confort Cars
Free shipping
Mainland France, no minimum order
Order processed within 24 h
Tracked from dispatch, delivered within 7 working days
Secure payment
We never see your card number
14 days to change your mind
Return with no reason required
A French shop
A business registered in France, customer service in French
A real reply
Write to us before ordering if you are unsure
No fake reviews
No rating shown until we have real customer feedback
A short selection
Products chosen for a specific use, not an endless catalogue



